汽车门板在济南汽车音响改装http://www.sdcarmusic.com/中有至关重要的作用，门板在拆除后应注意保护好，在安装时应注意不可漏掉任何一处螺丝以及少一个孔眼没有处理，并在固定方法方面都应特别注意漏气性的防范以及刚性的加强。那么应该如何处理汽车门板呢？

1、由于门板内部有许多的其它配件，这就要求在改装后，不得有因为松动而发出异声等现象。另外，如分频器盒的处理，应使用非常强的双面胶或其它胶类固定好，使其在长时间的运动中不会出现松脱或松动等现象。
Because there are many other interior door accessories, which requires that after modification, may not have been issued because of loose different sound and so on. In addition, as the divider box handle, use a very strong double-sided tape or other glue fixed, it will not come apart or loosening of such phenomena in the long campaign.

2、汽车的门扣卡件在拆除时应妥善保管好，在装回门板时应注意将全部卡扣安装好，否则会出现异声。螺丝在安装时，应注意将车门的钢板和门板紧密地进行固定，不应使门板的钢板与档板密封固定间有间隙。
Door deduction cards dismantling should take good care of the car, should be installed in the back door all the attention will snap installed, otherwise there will be a different sound. Screws when installing, you should pay attention to the door plates and door tightly fixed, should not make steel doors and tailgate there is a gap between the seal is fixed.

3、如果钢板稍有变形，应加装垫片处理。低音喇叭在安装时，应在喇叭后面增加密封垫，以确保扬声器有良好的密封性并安装良好。
If the plate is slightly deformed, should be installed gasket deal. Woofers in the installation, the gasket should be added in the back speakers, to ensure that the speakers have a good seal and install well.
 

济南汽车音响改装：http://www.sdcarmusic.com/